Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Killeen
If a driveway gate is dragging, won’t latch, or has stopped responding to the remote, we can help. Gate Repair Killeen works on gates only, which means when you call us you reach technicians who spend their week inside operators, control boards, and hinge posts rather than splitting their attention across a dozen trades. Our technicians have up to 13 years of experience, and we’re familiar with the older housing stock and legacy gate systems that show up across Killeen, from Pershing Park to Cedar Grove. Call (866) 722-0161 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Killeen Homeowners Call Gate Repair Killeen for Gate Repair
Killeen has no shortage of general handymen who’ll take a look at a gate. What’s harder to find is someone who can tell you why a LiftMaster operator stopped talking to its safety photocells, or whether a hinge post has shifted because of soil movement rather than a worn hinge. That gap is where we work. Our reputation around Killeen rests on diagnosis before replacement: we identify the actual failure – footing, hinge, weld, board, or receiver – and fix that rather than selling a whole new gate when a repair will hold.
We’re also honest about what we can and can’t do. This is a gate-only trade on our side: no HVAC, no plumbing, no garage doors competing for technician time. When we arrive, the work is the gate. Our technicians have up to 13 years of experience, and we carry that same repair-forward approach to residential driveway gates and commercial access systems alike. If you’re comparing options, read what we say about pricing and turnaround, then decide.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Wrought Iron Gate Repair in Killeen
Wrought Iron Gate Repair in Killeen usually comes down to welds and posts, not panels. The intense Central Texas sun bakes the finish off wrought iron, and the occasional heavy rain gets into every joint, so rust starts at the welds and travels down to the hinge post. When a Killeen homeowner calls with a sagging iron gate, the panel is rarely the problem – the hinge post has usually moved or the weld at the hinge has given way. A typical wrought iron repair in Killeen runs $250 – $700, depending on how much welding and post work is needed. The written estimate you get before we start is the final price.
Rust at the Welds
Rust creeping out from a weld joint is the first sign an iron gate is losing strength, and it’s cheapest to address before the weld fails entirely. We clean the joint, repair the weld, and treat the surrounding metal so the repair lasts through another summer.
Hinge Post and Frame Alignment
A wrought iron gate that drags at the latch side usually means the hinge post has shifted or the frame has twisted. We check the post first, then the frame, and realign before touching the hinges – replacing hardware won’t fix a post that’s moved.
Metal Gate Repair in Killeen
Metal Gate Repair in Killeen covers everything from a bent tube-steel driveway gate to a commercial swing gate that’s out of square. Older metal gates around the city often sit on posts set years ago in shallow concrete, and the ground movement from Central Texas’ expansive clay soils has quietly pushed them out of plumb. The repair is usually a combination of re-plumbing the post, correcting the sag, and checking that the operator still cycles cleanly once the gate is back in line. A typical metal gate repair in Killeen runs $200 – $650, and the price is quoted and agreed before any work starts.
Bent Panels and Tube Repair
A moving truck or a teenage driver clips a driveway gate and the tube bends at the hinge or the latch side. We straighten or replace the affected section and confirm the gate swings true before handing it back.
Rusted Posts and Footings
A post rusted through at the ground line is a safety issue, not a cosmetic one. We check the footing and the post together, because replacing one without addressing the other tends to fail within a season.
Trusted Brands We Service in Killeen
We work on your brand, not around it. Our technicians are factory-familiar with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, and we diagnose by the logic of the specific brand in front of us rather than guessing across the board. That matters in Killeen homes where an older Linear operator is being asked to work with hardware it was never paired with, or where a DoorKing commercial receiver has been swapped without the control board being updated. We don’t claim parts stock; we diagnose first, order what’s needed, and turn the repair around. From opener to operator, we know the system. Call us for local Gate Repair or reach out any time for an estimate.
Common Gate Repair Problems We See in Killeen Homes
- Shallow post footings cracking in clay soil. Much of Killeen’s older housing was built before engineered deeper footings became standard, and the expansive clay here shifts with every dry spell and wet spell. When the concrete around a post cracks, the gate misaligns even if the panel itself is fine.
- Obsolete control boards in legacy operators. Older LiftMaster and Linear operators sometimes can’t communicate with modern safety photocells, which leaves the gate non-compliant with UL 325. We check this every time we service an older system rather than assuming a board still works because the gate moves.
- Rusted welds on wrought iron. Sun and occasional rain attack the welds first, and a rusted hinge weld turns into a sagging panel within a season. Catching it early is the difference between a weld repair and a full panel replacement.
- Warped wood frames and loose hinges. Wood gates in Killeen’s dry summers and heavy rain events swell and shrink repeatedly, which loosens the hinge mount and drags the frame. A hinge post that’s also shifted makes it worse.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Killeen, TX
Pricing in Killeen reflects what the job actually needs, not a flat meter reading. A tight hinge realignment is on the low end; a post re-set in deeper concrete, new welds, and a control board update land higher. Here’s roughly what typical jobs run, as estimates:
- Hinge and realignment work: $150 – $400
- Wrought iron weld and rust repair: $250 – $700
- Metal gate panel and post repair: $200 – $650
- Electric operator or control board repair: $300 – $900
The written estimate we give you before any work starts is the final price. No surprises on the invoice. Every estimate in Killeen is free – call (866) 722-0161.
We Also Serve Cities Near Killeen
We serve Killeen and the surrounding Central Texas area, including Fort Hood, Nolanville, Harker Heights, and Copperas Cove. Whether you’re managing a rental near Fort Cavazos or a commercial property along the I-14 corridor, our gate repair team covers the same work in all four. If you’re in Killeen, learn more about what we do across Killeen and call for a free estimate.
Serving Killeen, TX – Our Local Coverage Area
We serve Killeen and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Killeen
Your gate drags after rain because the expansive clay soil in Killeen swells when wet and shifts the post footing, which throws the gate out of alignment even when the panel and hinges are sound. The fix is usually a post re-set in deeper concrete rather than hinge adjustment. Call (866) 722-0161 – estimates are free.
Sometimes yes, sometimes no – it depends on the operator’s control board. An older LiftMaster operator can often be paired with modern safety photocells if the board supports it, but a board that’s been obsolete for years may not communicate and will need replacement. We check the board before recommending either path. Call for a free on-site estimate.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems in Killeen. Whether it’s a residential Linear driveway operator or a DoorKing commercial access system, we diagnose by the brand’s specific logic rather than guessing. Call (866) 722-0161 to book an estimate.
Replacement becomes the cheaper answer when the hinge post footing is beyond repair, the frame is rusted through at multiple points, or the operator’s control board is obsolete and no replacement is available. In most Killeen cases, a single failed weld or a shifted post is a repair, not a replacement. Call for a free diagnosis and a written price.
A gate needs functioning safety photocells and, on many automated systems, an entrapment sensor that reverses the gate on contact. If the gate doesn’t reverse when the beam is interrupted, the protection is missing or failed – and that’s a safety issue, not a nuisance. We check the full safety circuit on every service call. Call (866) 722-0161 for an inspection.
Call Gate Repair Killeen for a Free Estimate
Whether it’s a dragging driveway gate in Pershing Park, a rusted iron gate in Cedar Grove, or an aging LiftMaster operator that’s stopped talking to its safety photocells, we’ll diagnose what’s actually wrong and tell you honestly whether a repair or replacement makes sense. We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday. Call (866) 722-0161 for a free estimate – the written price we agree before work starts is the price you pay.
Written by the team at Gate Repair Killeen.