Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Temple
If a driveway gate in Temple has started dragging, catching, or refusing to open at all, you’re in the right place. We handle gate repair, electric gate repair, and gate installation across the city, and we work on gates only, all day, every day. That focus matters here. Our technicians have up to 13 years of experience, and they recognize the difference between a gate that just needs a hinge adjustment and one whose hinge post has heaved out of the clay. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (866) 722-0161 and we’ll get a free estimate on the books.
Why Temple Homeowners Call Gate Repair Killeen for Gate Repair
Gates are the only thing we do. No garage doors, no HVAC, no plumbing sharing technician attention. That single-trade focus is why people in Temple call us and why property managers around the older south side and the newer subdivisions out west keep our number.
Our technicians have up to 13 years of experience, and they diagnose by brand logic rather than guesswork. Familiarity with nine major gate systems means a Linear operator that won’t cycle and a DoorKing entry system that’s dropping calls get evaluated differently from the first minute. We work on your brand, not around it, so you aren’t pushed toward a replacement system you didn’t ask for.
For Temple, we keep the estimate free and the scope honest. Diagnose first, replace only when necessary. That’s the rule whether we’re looking at a lightweight builder-grade aluminum slide gate in a new subdivision or a welded steel driveway gate hung decades ago near downtown. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Driveway Gate Repair in Temple
Driveway Gate Repair in Temple usually starts with a gate that no longer swings cleanly or an operator that stalls partway through a cycle. The cause is often the ground, not the gate. Expansive clay soil across the older core moves with each wet and dry cycle, and the hinge post slowly heaves until the swing gate drags and binds against the latch side. Typical driveway gate repair here runs $180 to $450 for hinge, post, and alignment work, while electric and operator repairs generally land between $250 and $750 depending on the fault. The written estimate sets the final price, and we quote it before any work starts.
Post Reset and Re-Concrete
When a hinge post has lifted, adjusting the hinges only buys you a season. We reset the post and pour fresh concrete at the proper footing depth, which is the fix that lasts through the summer drought and the winter freeze-thaw that follows it. Expect this to be the standard first move on older gates rather than an upsell.
Electric and Operator Repairs
Automatic gate repair on a sagging gate often reveals a second problem: the operator has been fighting the drag for months and the motor is stressed. We check the operator, control board, and receiver together so you’re not paying twice for one failure. Legacy units with obsolete boards get an honest retrofit-or-replace call.
Gate Welding in Temple
Gate Welding in Temple is usually about tired steel rather than a crash. The post-war and 1950s-70s brick ranch homes in the older core often still have their original welded steel driveway gates, and after decades of seasonal movement the welds at the frame corners crack and the gate sags in its own frame. Typical weld and rust repair here runs $150 to $400 per gate, depending on how many joints need rewelding and how much rust has to be prepped out first. We quote the price before we strike an arc.
Rust Repair and Re-Coating
Rust starts at the bottom rail where water sits and works up into the welds. We grind back the failing metal, rewelded the affected joints, and treat the steel so the repair holds through another hot, humid Central Texas summer. Left alone, rust thin enough to matter turns a weld job into a frame replacement.
When Welding Isn’t the Answer
If the gate frame has warped past the point of safe realignment, or the rust has eaten the main rails, welding it back together just postpones the inevitable. We’ll tell you plainly when a new gate is the cheaper long-term answer, and we install as well as repair, so you don’t need a second contractor to finish the job.
Trusted Brands We Service in Temple
We’re independent and experienced across nine major gate systems, including Linear, Viking, Ghost Controls, and DoorKing, along with LiftMaster, FAAC, BFT, Elite, and Mighty Mule. We don’t stock parts or claim to have every board on a shelf, and we won’t pretend otherwise. What we do is diagnose your existing system, identify what actually failed, and source what’s needed for a fast turnaround. You keep the gate and operator you already own unless replacement is genuinely the smarter spend. Familiarity with a brand shortens the diagnostic path, and that saves you time and money on the repair.
Common Gate Repair Problems We See in Temple Homes
- Hinge post heave and seasonal sag. Expansive clay soil shifts with every wet and dry cycle, so swing gates drag and bind after both summer drought and winter freeze-thaw. The recurring fix on older streets is a post reset and re-concrete, not a hinge tweak.
- Obsolete control boards in legacy operators. Gate operators from the 1990s fail after hard freezes or heat stress, and replacement boards for those models are often discontinued. We evaluate whether a modern board can be retrofitted or whether a new operator is the cheaper route.
- Builder-grade aluminum slide gates misaligned. Lightweight ornamental aluminum gates in newer subdivisions often need rack and pinion adjustment within the first year. The same builder-grade installs can also have faulty safety photocells out of the box.
- Heat-warped vinyl and stressed opener motors. Summer heat above 100°F warps vinyl privacy gates and pushes opener motors harder than their rating assumes. Hard use in that heat is what shortens an operator’s life.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Temple, TX
Most gate repair jobs in Temple fall into a few honest ranges. Hinge, post, and alignment work typically runs $180 to $450. Electric and operator repairs usually land between $250 and $750, and weld and rust repair runs about $150 to $400 per gate. A full operator retrofit with a modern control board costs more than a board-level fix, and a new gate installation is priced separately by measure and written estimate. The biggest cost driver here is the post, not the gate: clay-soil movement means the footing often has to be reset before anything else makes sense. The estimate is free, the price is agreed before any work starts, and there’s no surprise on the invoice.
We Also Serve Cities Near Temple
We work throughout the region around Temple, including Belton, Salado, Nolanville, and Harker Heights. If you’re just outside the city limits, call and we’ll confirm coverage and timing. Our gate repair team handles the same mix of driveway, electric, and welding work across these communities. Free estimates everywhere we go.
Serving Temple, TX – Our Local Coverage Area
We serve Temple and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Temple
The hinge post can almost always be fixed, and that’s the right first move. In Temple’s older core, the post lifts out of expanding clay with each freeze-thaw cycle, so resetting and re-concreting the footing restores the gate without replacing it. If the gate frame itself has warped or rusted through, replacement becomes the cheaper long-term answer. Call (866) 722-0161 for a free estimate.
It depends on the operator’s model and the condition of the motor and gearing. Many legacy operators can be retrofitted with a modern control board, which is the less expensive route. If the motor, gearbox, or safety hardware is also failing, a new operator often costs less over the next few years than piecemeal repairs. We quote both options so you can decide. Call (866) 722-0161 for an exact quote.
Yes, any automatic gate should have safety devices that meet UL 325, and we check them on every electric gate call. Photocells and other safety edges are what keep a moving gate from closing on a person or vehicle. If yours are missing or faulty, that’s a priority repair. Call (866) 722-0161 to have your safety hardware checked.
The rack and pinion is usually misaligned, and sometimes the safety photocells were never set correctly at install. Lightweight ornamental aluminum gates need proper track and rack adjustment within the first season, and that’s a straightforward fix. We adjust the operator to the gate rather than forcing the gate to follow a poorly set operator. Call (866) 722-0161 for a free on-site estimate.
A solar opener can work in Temple, but it needs to be sized for the seasonal heat and the drag that comes with clay-soil post movement. Summer temperatures above 100°F stress motors and drain batteries, so a solution for a heaving gate starts with the post and then moves to the operator. Call (866) 722-0161 for an honest assessment.
How a Gate Repair Usually Goes in Temple
The pattern repeats on the same older streets year after year. A driveway gate in the older core starts dragging because the hinge post has heaved in the clay, throwing the swing gate out of alignment. That gate may also be running a legacy operator with an obsolete control board. A qualified technician resets and re-concretes the post footing first, then evaluates whether the operator can take a modern control board or needs replacement. In the newer subdivisions out toward 76502, builder-grade aluminum slide gates often need rack and pinion adjustment plus a safety photocell check after only a season of use. Same city, two very different jobs.
Call for a Free Estimate in Temple
Whether you’re managing a rental near Fort Hood, keeping an old steel gate swinging on the south side, or sorting out a builder-grade slide gate that’s already misbehaving, we can help. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday. The estimate is free, the price is quoted and agreed before any work starts, and we’ll tell you honestly when a repair is the cheaper answer and when it isn’t. Call (866) 722-0161 to get started.
Written by the team at Gate Repair Killeen.