Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Florence
If your driveway gate has stopped opening, is dragging on the ground, or won’t latch, we can help. We handle gate repair across Florence, TX, from rural ranch entrances off FM 195 to homes closer to downtown. We know this stretch of the I-35 corridor well: big pipe-rail swings, automated property gates, and the caliche ground that works against both.
Our technicians have up to 13 years of experience, and they work on gates only. No garage doors, no side projects. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. When you call, we ask about your brand and your symptoms first, because a Linear operator and a DoorKing system fail in different ways. Call (866) 722-0161 for a free estimate.
Why Florence Homeowners Call Gate Repair Killeen for Gate Repair
Florence sits between Austin and Waco on I-35, and that location shapes the work. Most calls here are for large rural and semi-rural driveway gates, ranch entrances, pipe-rail gates, and automated swing gates, not the small decorative yard gates you see in denser towns. These gates take a beating from caliche soil, open-country wind, and steady truck traffic on shared driveways.
That means the diagnosis has to match the gate. A panel that looks fine but binds is usually a post problem, not an operator problem. A gate that stops halfway may be a control board trip after a power blip. Our technicians diagnose first and replace only when necessary, and they’re familiar with the brand you already own rather than pushing a swap.
We’re a gates-only operation, which is why homeowners and small commercial property managers in Florence call us back. We also cover Salado, Harker Heights, Killeen, and Nolanville, so scheduling across this part of Central Texas stays simple. If you want a specific answer about your gate, call us and describe what it’s doing.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Wood Gate Repair in Florence
Wood Gate Repair in Florence often comes down to heat and movement. Central Texas summers expand and warp wood panels, and when the ground beneath the hinge post shifts, the gate starts to drag, stick, or rub against the latch. If your wood gate has swelled, sagged, or won’t close cleanly, a hinge and alignment check usually explains why. Typical wood gate repair here runs $180 to $420 depending on whether posts need re-setting, hinges need replacing, or the frame needs re-hanging.
What a Wood Gate Repair Visit Covers
We check the hinge post for plumb, look at how the frame has moved, and test the latch and swing. Loose hinges get tightened or replaced, and hardware that’s pulled out of soft wood gets re-secured properly. When the post itself has heaved, re-setting it is often the fix that lasts.
Rust, Rot, and Refinishing
Weld and rust repair applies to metal frames and hardware, and weathered wood needs attention too. We look at the joints where water collects and where the frame has started to split. Repairing those early costs less than replacing a panel later.
Driveway Gate Repair in Florence
Driveway Gate Repair in Florence is mostly about the long runs. On rural acreage outside town, driveway gates span wide openings, and the caliche-heavy soil beneath them shifts during wet-dry cycles. A gate that worked fine last month can suddenly bind or sag. Typical driveway gate repair runs $220 to $650, with electric and automated diagnosis quoted separately once we’ve seen the system. We quote the price and agree it with you before any work starts.
Posts, Hinges, and Plumb
The first thing we check on a dragging gate is the hinge post. Caliche heave knocks posts out of plumb, and a gate will sag and drag even when the panel itself is sound. Re-setting the post and re-shimming the hinge usually restores a clean swing.
Operators and Safety Hardware
When the gate is automated, we look at the operator, the safety photocell, and the loop detector. Summer power blips trip logic boards and leave gates stuck open or closed until the system is reset. We reset the operator, realign the photocell, and adjust the rack and pinion if the panel has warped.
Trusted Brands We Service in Florence
We work on your brand, not around it. Our technicians handle Linear, Viking, Ghost Controls, and DoorKing systems, along with the other major gate brands found on Florence properties, and they diagnose by brand logic instead of guesswork. We don’t stock parts on a truck and we don’t claim to. What we do is identify the failed component quickly and get the right part ordered so the turnaround stays short. If your operator is older and the control board is the weak point, we’ll tell you straight rather than sell you a new gate. Call (866) 722-0161 to talk through your system.
Common Gate Repair Problems We See in Florence Homes
- Caliche soil heave. The blackland-to-caliche transition around Florence makes post footings shift unpredictably, so hinge posts go out of plumb and gates sag. A gate can bind even when the panel and operator are both fine.
- Power blips tripping the operator. Summer outages trip the logic board and leave automated gates stuck halfway. A reset and a check of the safety photocell usually gets the gate running again.
- Wind and truck traffic warping swing gates. Open-country wind and heavy trucks on shared driveways push metal swing gates out of alignment with loop detectors and photocells. Realignment and hinge repair are the common fixes.
- Heat-stressed wood panels. Older homes near downtown and acreage properties both have wood gates that swell and stick in summer heat. Re-hanging and hardware repair keep the gate usable without a full replacement.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Florence, TX
Gate repair pricing in Florence depends on the gate type, the failure, and how much post work is involved. Most wood gate repairs run $180 to $420, and most driveway gate repairs run $220 to $650. Electric and automated diagnosis is quoted once we’ve inspected the operator, control board, and safety hardware. What affects cost most is whether the post needs re-setting, whether the panel is warped, and whether the operator needs parts. We give a free estimate, quote the price, and agree it with you before any work starts, so the invoice matches the quote. The written estimate sets the final price. Pricing is per job. Call (866) 722-0161 for an exact quote.
We Also Serve Cities Near Florence
We cover customers across this part of Central Texas. Beyond Florence, we handle calls in Salado, Harker Heights, Killeen, and Nolanville, so if your property sits between towns, you’re still in our range. Same gate-only focus, same technicians, same free estimate. Tell us your brand and what the gate is doing, and we’ll plan the visit from there.
Serving Florence, TX – Our Local Coverage Area
We serve Florence and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Florence
Yes, that’s one of the most common causes in Florence. Caliche-heavy soil shifts during wet-dry cycles, which knocks hinge posts out of plumb and makes a gate bind or sag even when the operator is fine. A technician checks post plumb before blaming the electronics. Call (866) 722-0161 for an exact quote; estimates are free.
Your operator needs functioning safety devices, typically photocells or a loop detector, that stop or reverse the gate when something is in its path. If your gate closes on a person or vehicle without stopping, that’s a safety failure, not a nuisance. We test the safety hardware on every automated gate visit. Ask your city about current code requirements for your property, and call us to inspect the setup.
Often yes, and a sliding gate is the right answer when a swing gate can’t clear the space. Sliding gates run parallel to the fence line instead of arcing into the driveway, so shared access stays open while the gate operates. The key is a solid track and correct post footing on caliche ground. Call (866) 722-0161 to talk through your layout.
Heat expands and warps wood, and dry caliche ground shifts the hinge post, so the gate binds against the latch or drags on the ground. Repairs typically run $180 to $420 depending on whether posts and hinges need work. Re-hanging and hardware repair usually solve it without a new panel.
Start with the control box fault code and check whether the safety photocell is misaligned, since that stops the opener from running. A summer power blip can also leave the logic board tripped until it’s reset. Our technicians diagnose LiftMaster, Linear, Viking, Ghost Controls, and DoorKing systems by brand logic. Call (866) 722-0161 for a free estimate.
Get a Free Gate Repair Estimate in Florence
If your gate is dragging, sticking, or won’t open, don’t wait for it to fail completely. We repair wood gates, driveway gates, and automated systems across Florence, and we’ll quote the price and agree it with you before any work starts. Call (866) 722-0161. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and our technicians have up to 13 years of experience on gates only.
Written by the team at Gate Repair Killeen.